Le bateau présenté n'est pas actuellement en vente par Boatshed. Les informations et images du bateau présentées font partie du catalogue arrière de Boatshed des plus de 25000 bateaux que nous avons répertoriés au cours des 20 dernières années et apparaissent ici à des fins d'informations générales et de conseils sur Boatshed et nos systèmes et services de vente de bateaux.

Robert Perry 28' Classic Launch With Trailer

Built with modern methods
£0 Vendu / Non disponible
  • Bateau REF#  ·  240443
  • Longeur hors tout  ·  8.53m
  • Année  ·  2000
  • Construction  ·  Composite
  • Coque  ·  Planant
  • Moteur  ·  1 x essence 425cv, Marine Power M502 (2001)
  • Visible à  ·  Seattle
Boatshed Seattle
Boatshed Seattle
Dave Carleson

Le bateau présenté n'est pas actuellement en vente par Boatshed. Les informations et images du bateau présentées font partie du catalogue arrière de Boatshed des plus de 25000 bateaux que nous avons répertoriés au cours des 20 dernières années et apparaissent ici à des fins d'informations générales et de conseils sur Boatshed et nos systèmes et services de vente de bateaux.

Détails supplémentaires

Architecte Robert Perry
Chantier Schooner Creek Boat Works
Visible à Seattle
Capacité carburant 454.6 L Total - 2 Cuve(s)

Mécanique

Moteur 1 x essence 425cv
Marque et le modèle du moteur Marine Power M502 (2001)
Heures moteur moteur1= 30
Refroidi par Indirect
Barre barre à roue
Transmission arbre d'hélice
Hélice(s) 3 blade bronze
Consommation carburant (approx) Inconnu

This launch is powered by a single 425 horsepower freshwater cooled Marine Power 502 fuel injected gasoline engine coupled to a Borg Warner Velvet Drive Model 20-02-003 v-drive marine transmission. She runs a 1&1/2" diameter Aquamet 22 shaft with Michigan DynaJet 16"X18" nibral prop. All running gear is in "as new" condition with fewer than 30 total engine time. Recently serviced this August.

Dimensions

Longeur hors tout 8.53m
LOD 8.53m
Longeur flottaison 7.95m
Bau 2.13m
Tirant d'eau Min 0.61m
Tirant d'eau Max 0.61m
Deplacement 2,123kg
Stationnement A l'eau

Systèmes électriques

12 batterie volts, 2 batterie(s) chargé(s) par: moteur, prise de quai

Construction

Construction Composite
Coque Planant
Finition Peinture finition

The hull and deck were produced using a composite sandwich that captures 3/16" Honduran mahogany between layers of epoxy saturated 6 oz e-glass on the outside and 1/2" H80 high density foam coring backed by 1/4" okoume planking and carbon fiber on the inside to make an incredibly strong yet lightweight yacht. Her exterior is finished with six coats of Awlbright high gloss clear polyurethane for beauty and ease of maintenance.
Okoume is a type of Mahogany known for its high strength to weight ratio.

Schooner Creek Boat Works has been a leading builder of custom boats using modern light weight composite systems. They have been in business in Portland, Oregon since the mid 1970's and have a reputation for high quality work.

Aménagements

Climatisation 1 Climatisation Unités

Following the traditional launch design this boat has luxurious forward and aft seating areas separated by an integral bulkhead. The upholstery is Ultraleather and her soles are solid teak strips. The helm is located forward to starboard and includes comprehensive instrumentation, throttle and shift controls, auxiliary switches and an entertainment system with independently-adjusted speakers in the seating areas. Both seating areas have Heater Craft marine heaters to keep cruisers comfortable in chilly weather. Aft of the second row of seating is the engine hatch and it it followed by a lazarette hatch which gives access to the mufflers, steering quadrant and bilge pump. On the stern is a beautiful teak swim step which is built as an integral part of the hull.

Aménagements

Following the traditional launch design this boat has luxurious forward and aft seating areas separated by an integral bulkhead. The upholstery is Ultraleather and her soles are solid teak strips. The helm is located forward to starboard and includes comprehensive instrumentation, throttle and shift controls, auxiliary switches and an entertainment system with independently-adjusted speakers in the seating areas. Both seating areas have Heater Craft marine heaters to keep cruisers comfortable in chilly weather. Aft of the second row of seating is the engine hatch and it it followed by a lazarette hatch which gives access to the mufflers, steering quadrant and bilge pump. On the stern is a beautiful teak swim step which is built as an integral part of the hull.

Accastillage de pont

Taud entier
Amarres
Parre battages
Jupe

1 ancre(s)
(13 lb galvanized Danforth)
7.62m de chaîne
60.96m de bout
Steering is hydraulic Vetus
Morse single lever engine controls
Two automatic electric bilge pumps
Bilge blower
Dual Kahlenberg air horns with dedicated compressor
Guest spotlight with helm remote control
Battery charger with shore power connection and 30 amp shorepower cord

Dual group 27 batteries with parallel

Equipement de Navigation

Feux de navigation

Equipement de Sécurité

Gilets de sauvetage
Projecteur de pont
Corne

2 pompes de cale (0 manuel / 2 électrique)

Commentaires du Broker

Here is an opportunity to proudly own a gorgeous launch of a classic design in the style of Chris-Craft or Hacker-Craft. She is built of modern materials with a system of composite construction which should give years of trouble free ownership. This is a Robert Perry design and was built by Schooner Creek Boat Works in Portland, Oregon.

While the dual Kahlenberg air horns will command respect in a crowded harbor, the sheer beauty of this long, sleek, elegant nautical gem will be the more powerful attention-getter. And when underway there's nothing like the thrill of smoothly planing with throaty roar of the engine behind, and the spray far aft.

This launch was commissioned by a Seattle businessman and has been in dry storage since new. There are about 30 hours on the engine and it has just come from the shop with fresh oil change, tune-up, and filter changes. Despite its sparkling and new appearance this launch is offered at a fraction of the original cost to design and build.

This launch comes with a custom-built aluminum twin axle trailer.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

Ce bateau a été inspecté et photographié par Dave Carleson CPYB de Boatshed Seattle. Cliquer ici pour contacter le broker
Lorsque les détails ci-dessous donnent des détails sur un bateau, qu'il soit neuf ou d'occasion, ils sont destinés à donner une description juste du navire mais ne sont pas garantis comme exacts ou complets. Ils ne feront partie d'aucune offre ou contrat de vente du navire. Il est recommandé à l'acheteur potentiel de vérifier indépendamment les détails et le navire. Le vendeur ne vend pas dans le cadre d'une entreprise, sauf indication contraire. Les biens personnels sont exclus de la vente du navire à moins qu'ils ne soient spécifiquement inclus dans les spécifications d'inscription ci-dessus ou dans un contrat d'achat. Les biens personnels peuvent être des équipements ou des engins qui ne sont pas fixés en permanence au navire, y compris, mais sans s'y limiter : des œuvres d'art, du matériel de divertissement, du matériel de pêche, des récepteurs de télévision, du matériel de loisirs, des kayaks, des outils et des appareils personnels. Les photos qui peuvent accessoirement représenter les biens personnels des propriétaires ne signifient pas que ces articles sont inclus dans la vente du navire à moins que ces articles ne soient spécifiquement énumérés ici. À tout moment, lorsque les détails ci-dessous donnent des détails sur un nouveau bateau et/ou un nouveau bateau à fournir/construire par un constructeur/fabricant, ou un bateau à affréter, via notre introduction, nous ne garantissons ni n'assumons la responsabilité de l'exactitude ou la fiabilité de toute information fournie par des sociétés tierces à cet égard, y compris, sans s'y limiter, les nouveaux constructeurs/constructeurs de bateaux, les sociétés de charter et/ou les sociétés/entreprises qui sont des « Amis de Boatshed ». Nous ne serons pas responsables de, ou partie à, toute transaction, contrat ou accord entre vous et ces tiers fournisseurs de produits ou services et il vous incombe de vérifier ces détails directement auprès de ces entités et de conclure un contrat avec elles à votre seule discrétion. discrétion et selon des conditions que vous acceptez.

Commentaire 0

Veuillez noter que cette section de commentaires est publique . Ne postez pas vos informations personnelles ici. Pour vous renseigner sur l'achat de ce bateau, contactez directement le courtier au davecarleson@boatshedseattle.com Veuillez lire nos consignes de commentaires avant de poster.

Soyez le premier à laisser un commentaire ou à poser une question ...
Vous devez être connecté pour laisser un commentaire.
Login ou inscription gratuite